1、输入特性(INPUT CHARACTERISTICS):
1.1输入电压(Input Voltage):
额定电压(Nominal Voltage):100-240Vac
调整范围(Variation Range):90-264Vac
1.2输入频率(Input Frequency):
额定频率(Nominal Frequency):50/60Hz
调整频率(Variation Frequency):47-63Hz
1.3输入电流(Input Current):
当输入交流电压为额定值的下限时,输出电压负载满载,最大输入交流电流0.5A.
0.5Arms max At any input voltage and rated,DC output rated load.
2、输出特性(OUTPUT CHARACTERISTICS):
2.1输出功率(Power Output);
电压充电电流充满转换电流输出功率
Voltage Min.Load Max.Load Output Power
+12.6 V 4 A 150mA 50.4 W
2.2负载特性/调整率(Combined Load/Line Regulation):
电压最小空载电压最大空载电压线性调整负载调整
+12.6 V 12.4 V 12.6 V 3%±5%
2.3充电示意图
3、保护功能(PROTECTION REQUIREMENT):
3.1短路电路保护:
Short Circuit Protection:
该电源供给器在短路解除时,能恢复正常工作。
The power supply will be auto recovered when short circuit faults remove.
3.2过流保护(Over current Protection):
过流故障排除后,电源将自动恢复正常工作。
The power supply will be auto recovered when over current faults remove.
3.3过压保护(Over Voltage Protection)
当输出电压超过额定电压时,电源将保护,故障排除后能恢复正常工作。
The power supply will not be auto recovered when faults remove.
1773376265_751234218_副本
4、安全及EMC要求(SAFETY AND EMC REQUIREMENT):
4.1安全标准:
符合CCC认证。
4.2高压(DIELECTRIC STRENGTH):(测试方法按下面接线图)
()Primary to secondary):4242Vac/5mA/60s.